Toshiba e-STUDIO206L Service Manual page 427

(4) Install the high-voltage transformer jig and fix
it with 2 screws.
Notes:
Be careful not to let the connector and the
harness be caught.
(5) Fix the green cable of the high-voltage
transformer jig to the frame of the equipment.
(6) Install the door switch jig.
(7) Take off the transfer roller unit.
(8) Close the automatic duplexing unit.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Process unit
Fig.6-23
Green cable
Fig.6-24
Door switch jig
Fig.6-25
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
6 - 47
SETTING / ADJUSTMENT
6