Grease List; Operational Items In Overhauling - Toshiba e-STUDIO206L Service Manual

7.11 Grease List

The greases used for the maintenance of this equipment are as follows.
Grease name
SI Silicon oil
L Launa 40
W2 White grease (Molykote HP-300)
AV Alvania No.2
W1 White grease (Molykote EM-30L)
FL Floil (GE-334C)
7.12 Operational Items in Overhauling (e-STUDIO206L/256/306/356/
456/506)
Overhaul each equipment in the following timing.
• e-STUDIO206L: When the number of output pages has reached 240,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO256: When the number of output pages has reached 300,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO306: When the number of output pages has reached 360,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO356: When the number of output pages has reached 375,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO456: When the number of output pages has reached 450,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO506: When the number of output pages has reached 450,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
(1) Replace all the supplies.
(2) Check the components in the drive section (gears, pulleys, timing belts, etc.). Replace them with
new ones if they are damaged.
(3) Check all the adhesives such as tape and Mylar if they are damaged or have become unstuck.
Replace them with new ones if necessary.
(4) Check the performance of all the switches and sensors. Replace them with new ones if
necessary.
(5) Clean inside the equipment thoroughly.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Volume Container
25cc Bottle
100cc Oiler
10g Bottle
100g Tube
100g Tube
20g Bottle
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
7 - 53
Parts list
<P-I>
101-16
101-11
101-12B
101-13
101-14
101-15
PREVENTIVE MAINTENANCE (PM)
7