Notes:
1. When installing, be sure that the harness
[1] of the APS sensor comes over the
lens unit [2].
2. See 6.9.2 for the adjustment procedure.
3. Do not touch the 8 screws shown with the
arrows when replacing the lens unit.
4. Handle the unit with care. Do not touch
the adjusted area and lens. (Hold the unit
as shown in the right figure.)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Fig. 4-100
Fig. 4-101
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 34
[2]
[1]
Fig. 4-99