[Ea20] Paper Transport Stop Jam - Toshiba e-STUDIO206L Service Manual

Check item
Finisher control PC board
(FIN)
Parts to be replaced
Feeding sensor (S22)
Transport path switching
solenoid (SOL5)
Entrance motor (M1)
Interface PC board (I/F)
Finisher control PC board
(FIN)

[EA20] Paper transport stop jam

Classification
Paper jam in finisher section
MJ-1101/1107
Check item
Transport sensor
Finisher controller PC board
Parts to be replaced
Transport sensor
Finisher controller PC board
MJ-1106/1108
Check item
Finisher
Entrance sensor (S1)
Finisher control PC board
(FIN)
Parts to be replaced
Entrance sensor (S1)
Finisher control PC board
(FIN)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Measures
• Board check
• Connector check (CN25, CN27)
• Harness check
Remark
Paper transport delay jam
Measures
• Sensor check
• Connector check (S2)
• Harness check
Board check(CN22)
Remark
Measures
Check if there is any paper in the finisher or on the transport path of
the equipment and remove it if there is.
• Sensor check
• Connector check
• Harness check
• Board check
• Connector check (CN26)
• Harness check
Remark
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 93
Error content
ERROR CODE AND TROUBLESHOOTING
8