Toshiba e-STUDIO206L Service Manual page 259

(5) Remove 1 screw and take off the thermostat
cover [1].
(6) Remove 2 screws, and then take off the
fuser center thermostat [1].
Notes:
• Wire the harness as shown in the figure and
fix it with clamp securely.
• Do not loosen the 1 red screw [2] fixing the
thermostat holder.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
[1]
Fig. 4-338
[1]
Fig. 4-339
Fig. 4-340
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 119
[2]
[1]
DISASSEMBLY AND REPLACEMENT
4