Toshiba e-STUDIO206L Service Manual page 313

(25) Disconnect 2 connectors from the LGC
board.
(26) Remove 1 screw and take off the metal plate
cover [1].
(27) Remove 1 screw and take off the laser
optical unit.
Notes:
When removing and installing the laser
optical unit, be careful not to deform the leaf
spring.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
LGC board
Fig. 4-495
[1]
Fig. 4-496
Leaf spring
Fig. 4-497
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 173
Connector
Laser optical unit
DISASSEMBLY AND REPLACEMENT
4