Adu Clutch (Clt1) - Toshiba e-STUDIO206L Service Manual

4.15.6

ADU clutch (CLT1)

(1) Take off the ADU.
( P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)")
(2) Remove 4 screws and take off 2 brackets.
(3) Take off the transfer unit.
(4) Disconnect 1 connector, remove 2 screws
and take off the bypass feed unit.
(5) Remove 4 screws and the take off the ADU
lower guide.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Transfer unit
Bracket
Fig. 4-392
Bypass feed unit
Fig. 4-393
ADU lower
guide
Fig. 4-394
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 139
Bracket
Connector
DISASSEMBLY AND REPLACEMENT
4