Firmware Updating With K-Pwa-Dlm-320F - Toshiba e-STUDIO206L Service Manual

11.6 Firmware Updating with K-PWA-DLM-320F

The firmware of the option (FAX ROM) can be updated individually by using K-PWA-DLM-320F. Update
the ROM data written on each board according to the need such as the case of replacing the board.
Options
Model name
Fax Unit
(GD-1250)
Fax Unit
(GD-1350)
K-PWA-DLM-320F
Important:
Pay attention to the direction of the ROM.
Remarks: Useable jigs
Download jigs for this equipment are as follows:
No.
1 K-PWA-DLM-320F
2 K-PWA-DLM-320
*Jig No. 2 above can be used if a relay board is installed together even though the shape of its
connector differs.
* Relay board: PWA-DWNLD-RELAY-34F
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Firmware
Fax unit firmware
Connector Mark for ROM
installation direction
Fig.11-76 Jig board: K-PWA-DLM-320
Type of jig
11 - 77
Stored
FAX board
LED
ROM
Remarks
Requires a relay board
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
e-STUDIO e-STUDIO
206L/256/ 207L/257/
306/356/ 307/357/
456/506 457/507
No -
- Yes
FIRMWARE UPDATING
11