Toshiba e-STUDIO206L Service Manual page 1084

Sub
05/08 Mode Element
element
05 Adjustmen Printer Image
t mode
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
4064
1st drawer 4100
1st drawer 4100
Sub- Default Acceptable
Details
code value value
1 Right margin 0 0~255
adjustment (blank
area at the right of the
paper along the paper
feeding
direction)/Reverse
side at duplexing
0 Plain paper; Long Refer to 0~63
size contents
1 Plain paper; Middle Refer to 0~63
size contents
8
RAM Contents
M When the value increases by "1", the blank area
becomes wider by approx. 0.0423 mm.
M e-STUDIO206L/256/306:When the value increases by
"1", the aligning amount increases by approx. 0.3 mm.
e-STUDIO356/456/506:When the value increases by
"1", the aligning amount increases by approx. 0.4 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size: 219 mm or shorter
<Default value>
e-STUDIO206L/256/306: 37
e-STUDIO356/456: 21
e-STUDIO506: 17
M e-STUDIO206L/256/306:When the value increases by
"1", the aligning amount increases by approx. 0.3 mm.
e-STUDIO356/456/506:When the value increases by
"1", the aligning amount increases by approx. 0.4 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size: 219 mm or shorter
<Default value>
e-STUDIO206L/256/306: 37
e-STUDIO356/456: 21
e-STUDIO506: 17
Proc Service
edure UI
4
4 Yes
4 Yes