Hdd Fault Diagnosis - Toshiba e-STUDIO206L Service Manual

9.3.2

HDD fault diagnosis

This code displays the HDD operation history, which is recorded in the HDD, on the control panel. HDD
failure can be diagnosed or predicted with the information displayed.
1. Display
The following screen is displayed with setting code 08-9065.
HDD manufacturer
- Items supported differ depending on the HDD manufacturer.
- "---" is displayed on the VALUE, NAV and Worst columns if items are not supported.
2. Usage
The combination of the values of ID=05 and c5 is used to diagnose whether or not the HDD has a
physical failure when HDD failure is suspected (service call F100-108 or 120 occurred).
Result
ID VALUE
05 0 Low possibility of physical failure
c5 0
05 From 1 to 999 Defective sector has been reassigned and HDD is recovered.
c5 0
05 Any value High possibility of defective sector existence. (There will be a
possibility of physical failure depending on the use of HDD.)
c5 1 or more
05 Either one is at High possibility of physical failure
least 1000.
c5
05 All values are High possibility of physical failure (A HDD connector, harness or
displayed as SYS board may be one of the causes.)
c5
"-------".
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Model name HDD serial number
Fig. 9-42
Description
9 - 17
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
REPLACEMENT OF HDD/PC BOARDS
Diagnosis
HDD replacement
is not required.
HDD replacement
is not required.
HDD replacement
is recommended.
HDD replacement
is recommended.
HDD replacement
is recommended.
9