Paper Left On The Transport Path Due To Multiple Feeding; When The Paper Is Fed From The Upper Drawer - Toshiba e-STUDIO206L Service Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO206L:
Table of Contents

Advertisement

[EB50] Paper left on the transport path due to multiple feeding
Classification
Paper transport jam

When the paper is fed from the upper drawer:

Proce
Check item
dure
1
ADU
2
Is the registration sensor
working? (Perform the
input check: 03-[FAX]/ON/
[9]/[A])
3
LGC board
Parts to be replaced
Registration sensor
LGC board
Rollers on the transport path
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
The multiple feeding of preceding paper caused the misfeeding of
upcoming paper.
Result
Open the ADU and remove paper if there is
any on the transport path.
Yes
Check the rollers. Replace them if they are
worn out
No
1. Check if the connector CN316 on the LGC
board is disconnected.
2. Check if the connector pins are
disconnected or the harnesses are open
circuited.
3. Check if the conductor patterns on the LGC
board are short circuited or open circuited.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 54
Error content
Measure
Remark
Next
Step
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents