[C180] Lcf Tray-Up Motor Is Abnormal - Toshiba e-STUDIO206L Service Manual

[C180] LCF tray-up motor is abnormal

Classification
Paper feeding system related service
call
Proce
Check item
dure
1 Does the tray move?
(Perform the output check
in the test mode: 03-271)
2 Are the LCF tray bottom
sensor and LCF tray-up
sensor working?
(Perform the input check
in the test mode: 03-
[FAX]OFF/[5]/[A], /[5]/[B])
3 LGC board
Parts to be replaced
LCF board
LGC board
LCF tray-up motor
LCF tray-up sensor
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Error content
LCF tray-up motor is abnormal
Result
Yes
No 1. Does the tray move? (Perform the output
check in the test mode: 03-271)
2. Check if the connector of the LCF tray-up
motor is disconnected.
3. Check if any of the connectors CN1 and
CN5 on the LCF board is disconnected.
4. Check if the connector CN318 on the LGC
board is disconnected.
5. Check if the connector pins are
disconnected and the harnesses are open
circuited.
6. Check if the conductor patterns on the LCF
board and LGC board are short circuited or
open circuited.
7. Replace the LCF board.
Yes
No 1. Check if the connectors of the sensors are
disconnected.
2. Check if any of the connectors CN1, CN2
and CN6 on the LCF board is disconnected.
3. Check if the connector CN318 on the LGC
board is disconnected.
4. Check if the slit reaches the sensors.
5. Check if the connector pins are
disconnected and the harnesses are open
circuited.
6. Check if the conductor patterns on the LCF
board and LGC board are short circuited or
open circuited.
7. Replace the LCF board.
8. Replace the LGC board.
1. Check if the conductor pattern on the LGC
board is short circuited or open circuited.
2. Replace the LGC board.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 125
Measure
Remark
ERROR CODE AND TROUBLESHOOTING
Next
Step
2
8
3