Scanner Related Adjustment; Image Distortion; Adjustment Screw For The Mirror-3 (Rear) - Toshiba e-STUDIO206L Service Manual

6.3.4

Scanner related adjustment

[A] Image distortion
A
Step 1
C
Step 2
<Procedure>
(1) While pressing [0] and [5] simultaneously,
turn the power ON.
(2) Press [FAX] next [START] to make a copy of
any image on a sheet of A3/LD paper.
(3) Key in [3033] and press the [START] button
to move the carriage to the adjustment
position.
(4) Make an adjustment in the order of step 1
and 2.
• Step 1
- In case of A:
Tighten the mirror-3 adjustment screw
(CW).
- In case of B:
Loosen the mirror-3 adjustment screw
(CCW).
• Step 2
- In case of C:
Tighten the mirror-1 adjustment screw
(CW).
- In case of D:
Loosen the mirror-1 adjustment screw
(CCW).
(5) Apply the screw locking agents to the
adjustment screws. (2 areas)
• Recommended screw lock agent
Manufacturer: Three Bond
Product name: 1401E
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
Feeding direction
Feeding direction
Fig.6-10

Adjustment screw for the mirror-3 (Rear)

Adjustment screw
for the mirror-1 (Rear)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 14
B
D
Carriage-2
Fig.6-11
Carriage-1
Fig.6-12