Grate-Shaped Guide - Toshiba e-STUDIO206L Service Manual

*h Grate-shaped guide
After the grate-shaped guide [1] is cleaned with alcohol, use a cleaning brush to apply coating
material (SANKOL CFD-409M) on the part with which the paper edge is in contact.
*Use a cleaning brush (4407915710 BRUSH-33) because cloth contaminated with the coating
material shall be treated as industrial waste.
*Do not apply coating material (Molykote PD-910) to the rubber section of the grate-shaped tray.
*When coating material adheres to the skin, rinse it well with water.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
PREVENTIVE MAINTENANCE (PM)
[ 1 ]
Fig. 7-45
7 - 44
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved