Right Rear Cover-1 / Right Rear Cover-2 - Toshiba e-STUDIO206L Service Manual

(3) Remove 1 screw and then take off the
connecting port cover by releasing 2 hooks.
Remarks:
When installing the connecting port cover,
hang the 2 hooks of the connecting port
cover on the frame of the equipment, and
then fix it with 1 screw.
4.2.14

Right rear cover-1 / Right rear cover-2

[A] e-STUDIO207L/257/307
(1) Take off the connecting port cover.
 P. 4-14 "4.2.13 Connecting port cover"
(2) Open the automatic duplexing unit.
(3) Release 3 hooks by sliding the right rear
cover-1 [1] to the right side, and then take off
the right rear cover-1 [1] toward the front
cover.
(4) Remove 1 screw and take off the right rear
cover-1 [1].
[B] e-STUDIO357/457/507
(1) Take off the connecting port cover.
 P. 4-14 "4.2.13 Connecting port cover"
(2) Open the automatic duplexing unit.
(3) Release 2 hooks by sliding the right rear
cover-2 [1] to the right side, and then take off
the right rear cover-2 [1] toward the front
cover.
(4) Remove 1 screw and take off the right rear
cover-2 [1].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-43
Fig. 4-44
Fig. 4-45
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 15
[1]
[1]
DISASSEMBLY AND REPLACEMENT
4