Transfer Roller; Separation Needle - Toshiba e-STUDIO206L Service Manual

4.11.15 Transfer roller

(1) Take off the transfer roller unit
( P. 4-97 "4.11.14 Transfer roller unit").
(2) Release 4 hooks and then take off the
transfer roller.
Notes:
Be careful not to drop the spring.
(3) Remove 1 gear, 2 guide rollers and 2
bushings from the transfer roller.
Notes:
When installing the bushings and gear, pay
attention to the direction of them.

4.11.16 Separation needle

(1) Take off the transfer roller unit.
( P. 4-97 "4.11.14 Transfer roller unit").
(2) Release 2 hooks and then take off the cover.
(3) Take off the separation needle paying
attention not to deform it.
Notes:
When installing the separation needle, be
sure to insert it underneath the power supply
plate.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Transfer roller
Fig. 4-278
Transfer roller
Bushing
Guide roller
Fig. 4-279
Separation needle
Fig. 4-280
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 98
Gear
Guide roller
Bushing
Power supply plate
Cover