Toshiba e-STUDIO206L Service Manual page 692

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO206L:

Table of Contents

Parts to be replaced

Carriage home position sensor

Scan motor harness

e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507

ERROR CODE AND TROUBLESHOOTING

1. Check if the harness of the carriage home position sensor on

the SLG board is connected properly.

2. Check if the mounted parts on the SLG board are damaged

or abnormal.

3. Check if 24 V on the SLG board is short-circuited.

4. Check if 24 V is supplied to the SLG board.

1. Check if the belt tension is loosened.

2. Check if the motor fixing screw is loosened.

3. Check if the carriage wire and the timing belt come off.

4. Check if the connector is connected to the motor properly.

5. Check if the harness of the motor is caught or open circuited.

Show Quick Links

Table of Contents

Troubleshooting