Development System - Toshiba e-STUDIO206L Service Manual

4.12 DEVELOPMENT SYSTEM

4.12.1 Process unit
(1) Open the automatic duplexing unit.
(2) Open the front cover and take off the toner
cartridge.
(3) Loosen 2 screws and pull out the process
unit.
4.12.2 Developer unit
Notes:
Make sure to perform "05-2390" and take off the process unit before the developer material is
replaced.
(1) Take out the process unit
( P. 4-100 "4.12.1 Process unit").
(2) Take out the drum cleaner unit from the
process unit so that only the developer unit
will be left in it
( P. 4-88 "4.11.2 Drum cleaner unit").
Notes:
1. Be careful not to touch or scratch the
drum surface at this time.
2. Do not deform the Guide film by touching
this.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Process unit
Drum cleaner unit
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 100
Fig. 4-283
Developer unit
Fig. 4-284
Guide film
Fig. 4-285