Main Screen - Toshiba e-STUDIO206L Service Manual

[ 2 ] Operational screen

1. Main screen

9
Displaying of the number of print / develop pages (Page/D. cnt), drive counts (Cnt.) and
1
previous replacement date (Chg.) for a chosen unit
When the replacement date for the sub unit is different, press the [SUB UNIT] button to
move to the sub screen and see each information, otherwise information is not displayed
Moving to the next/previous page
2
Displaying of the standard number of drive counts to replace the unit parts
3
Displaying of the present drive counts
4
"*" is displayed next to the present number when the number of drive counts has exceeded
its PM standard number.
Displaying of the present number of print / develop pages
5
When there are differences among the sub units (parts), "_" is displayed and "CHECK
SUBUNIT" is displayed at the top
"*" is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the standard number of print / develop pages to replace the unit parts
6
Moving to the sub screen of the selected unit
7
8
Moving to the clear screen to clear the selected unit counters
unit (parts) counters belonging to that unit When the unit is not selected, all counters are
cleared.
Displaying of the main unit name
9
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
PREVENTIVE MAINTENANCE (PM)
1
8 7
Fig. 7-3
7 - 6
6 5 4
4
and
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
3
2
, including all sub
6