Paper Width Detection Pc Board (Sfb) - Toshiba e-STUDIO206L Service Manual

(5) Disconnect 1 connector and then take off the
bypass tray downward obliquely.
4.9.11

Paper width detection PC board (SFB)

(1) Take off the bypass tray.
( P. 4-69 "4.9.10 Bypass tray").
(2) Remove 3 screws and take off the bypass
tray upper cover.
(3) Remove 1 screw and then take off the
sensor cover by releasing 3 hooks.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Bypass tray
Fig. 4-196
Fig. 4-197
Sensor cover
Fig. 4-198
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 70
Bypass tray upper cover