[803B] Ikev2 Certificate Failed; [803C] Ikev2 Secret Key Authentication Failed; [803D] Ikev2 Falling Back To Ikev1; [803E] Ikev2 Isakmp Sa Unavailable - Toshiba e-STUDIO206L Service Manual

[803B] IKEv2 Certificate failed

Classification
Network error
Check item
Setting

[803C] IKEv2 secret key authentication failed

Classification
Network error
Check item
Setting

[803D] IKEv2 falling back to IKEv1

Classification
Network error
Check item
Setting

[803E] IKEv2 ISAKMP SA unavailable

Classification
Network error
Check item
Setting
[803F] IKEv2 cryptographic operation failed
Classification
Network error
Check item
Setting
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Ipsec error for ikev2 certification failed
Check
1. CA and user certificate in both MFP and remote peer -
certificate timestamp and IPsec Certificate template
should be valid.
2. CRL DP server name is mapped in MFP's host table or
DNS entry.
3. Certificate against CRL.
Ipsec error for ikev2 if secret key auth failed
Mismatch in IKEv2 Pre Shared Key. Check the PSK in MFP
and peer machine.
Ipsec error if peer does not support IKEv2 and falling back to
IKEv1
Remote machine is not supporting IKEv2. Going back to use
IKEv1.
Ipsec error if ISAKMP SA is not created of destroyed due to
some uncertain condition
Restart IPsec service on Peer and retry.
Ipsec error for ikev2 if crypto operation failed
If Certificates are being used, re-upload the corresponding
certificates using Security Services. Restart IPsec Service on
MFP.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 284
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures