Toshiba e-STUDIO206L Service Manual page 974

(6) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
Item
1. SYSTEM FIRMWARE(OS Data)
2. ENGINE FIRMWARE
3. SCANNER FIRMWARE
4. SYSTEM SOFTWARE (HD Data)
5. RADF FIRMWARE
6. FINISHER FIRMWARE
7. SADDLE FIRMWARE
8. PUNCH FIRMWARE
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
SYSTEM FIRMWARE(OS Data) update in
progress
ENGINE FIRMWARE
SCANNER FIRMWARE
SYSTEM SOFTWARE (HD Data) update in
progress
RADF FIRMWARE update in progress
FINISHER FIRMWARE update in progress
SADDLE FIRMWARE update in progress
PUNCH FIRMWARE update in progress
(8) "Update successfully completed Restart the MFP" is displayed at the bottom of the LCD screen
after the updating is completed properly.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
FIRMWARE UPDATING
Updating OS data
Updating Engine ROM
Updating Scanner ROM
Updating Master data and application
Updating RADF ROM
Updating Finisher ROM
Updating Saddlestitcher ROM
Updating Puncher ROM
update in progress
update in progress
Fig.11-16
11 - 18
Remarks
Status display when update is completed
SYSTEM FIRMWARE(OS Data)
ENGINE FIRMWARE
CANNER FIRMWARE
SYSTEM SOFTWARE (HD Data)
RADF FIRMWARE Completed
FINISHERFIRMWARE
SADDLEFIRMWARE Completed
PUNCHFIRMWARE Completed
System Firmware Version
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Completed
Completed
Completed
Completed
Completed