11.5.6
Finisher firmware (MJ-1106)
Important:
•
Be sure to shut down the equipment before installing and removing the download jig.
•
Do not shut down the equipment during the update. The data could be damaged and not be
operated properly.
[A] Update Procedure
(1)
Attach the ROM to the download jig.
Make sure that the ROM and its direction are correct.
(2)
Turn OFF the power of the equipment.
(3)
Remove 2 screws and take off the board access cover [1].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
[ 1 ]
Fig.11-46
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
11 - 55
FIRMWARE UPDATING
11