2Nd Transport Sensor (S14); Feed Cover Opening/Closing Detection Sensor (S13); Flywheel (E-Studio206L/256/306 / 207L/257/307) - Toshiba e-STUDIO206L Service Manual

4.9.21

2nd transport sensor (S14)

(1) Take off the transport roller.
( P. 4-76 "4.9.20 Transport roller").
(2) Take off the actuator.
(3) Release 3 latches and then take off the 2nd
transport sensor.
4.9.22

Feed cover opening/closing detection sensor (S13)

(1) Take off the transport roller.
( P. 4-76 "4.9.20 Transport roller").
(2) Release 3 latches and then take off the feed
cover opening/closing sensor.
4.9.23

Flywheel (e-STUDIO206L/256/306 / 207L/257/307)

(1) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(2) Remove 1 screw and then remove 2
flywheels.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Actuator
Fig. 4-217
Feed cover sensor
Fig. 4-218
Flywheel
Fig. 4-219
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 77
2nd transport sensor
DISASSEMBLY AND REPLACEMENT
4