Tray Back Cover - Toshiba e-STUDIO206L Service Manual

(2) Remove 2 tap-tight screws [1] and 5 screws.
Then take off the left cover [2].
4.2.12

Tray back cover

(1) Take off the left rear cover-1.
 P. 4-13 "4.2.8 Left rear cover-1"
(2) Take off the inner tray.
 P. 4-13 "4.2.10 Inner tray"
(3) Take off the tray back cover [1].
4.2.13 Connecting port cover
(1) If a dongle has been installed, remove 2
screws and then the dongle cover [1].
(2) Open the automatic duplexing unit.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 14
Fig. 4-40
Fig. 4-41
Fig. 4-42