8.3.23
Printer function error
[4011] Print job cancellation
Classification
Printer function error
Check item
Setting
[4021] Print job power failure
Classification
Printer function error
Check item
Setting
[4030] No printer kit/Invalid
Classification
TopAccess related error
Check item
Setting
[4031] HDD full error
Classification
TopAccess related error
Check item
Setting
[4032] Private-print-only error
Classification
TopAccess related error
Check item
Setting
[4033] Printing data storing limitation error
Classification
TopAccess related error
Check item
Setting
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Print job cancellation
•
This message appears when deleting the job on the screen.
Print job power failure
•
When there are running jobs, perform the job in error
again after the completion of the running jobs. If the error
still occurs, turn the power OFF and then back ON, and
perform the job again.
No printer kit/Invalid
•
Install the print kit and perform the job again.
•
Register it officially and perform the job again.
HDD full error
•
Delete unnecessary private print jobs and invalid
department print jobs.
Private-print-only error
•
Select "Private", and then perform the printing again.
Printing data storing limitation error
•
Select "Normal Print", and then perform the printing again.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 252
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures