<Adjustment procedure>
(1)
Loosen screw A. Remove screw B and
temporarily fix it to position C.
(2)
Adjust the position of the stay with the scale
according to the dogleg image and tighten
screws A and C.
•
Dogleg image A
Perform adjustment so that the stay of the
fuser unit comes below the center line of
the scale.
•
Dogleg image B
Perform adjustment so that the stay of the
fuser unit comes above the center line of
the scale.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig.6-65
A
C
Fig.6-66
A
C
Fig.6-67
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
6 - 69
A
C
B
SETTING / ADJUSTMENT
6