Config...\General Settings...
18.6
Description
Start Up & Power Down
•
The settings on this screen
• define the instrument start up screen.
• define the behaviour of the instrument and SmartAntenna when starting up and when
powering down.
• define a PIN code which needs to be entered when starting up the instrument.
Start Up
•
The screen entered after turning on the instrument can be configured.
Power Down
•
Once power is restored after a power loss the instrument returns to the screen in which it
was operating when the power failed. After restarting, the instrument uses the same job
and configuration set as before the power loss. If either the job or configuration set are
not available the first in the list is used.
•
Two types of power loss could be experienced:
• Sudden power loss: Internal or external battery being removed
• Gradual power loss: Internal or external battery running down naturally
PIN Code
•
A Personal Identification Number protection can be activated.
Type
PIN protection active
TPS1200
Description
Instrument prompts for PIN code entry
368