Hitachi Compute Blade 2000 User Manual page 582

If you enter S in the PR command menu and press Enter, you can display the partition
status.
-- LP status --
P Mode License
- ----- --------------
0 Basic Not Installed
1 Basic Enterprise
2 --- ------------
3 --- ------------
4 Basic Enterprise
5 LP Enterprise
6 Basic Enterprise
7 Basic Enterprise
Hit enter key.
Items of the LP status are described in the table below: LP status.
Item Description of item
Logical Partitioning
Mode
mode
LP License -
If you enter P in the PR command menu and press Enter, you can set the partition.
You are required to select a partition and the prompt is ready. Enter a partition number,
and the current setting value of the partition in the following order: the prompt is ready.
Press Enter, or input the setting value and press Enter to go to the next setting.
Value
------- No blade slot belongs to.
No blade slot installed
Currently in initialization
LP Logical Partitioning is Enabled:
LPAR manager boots up.
Basic Logical Partitioning is Disabled:
LPAR manager does not boot up.
ERROR Fails to obtain status due to an
error.
------- No blade slot belongs to.
No blade slot installed
Currently in initialization
Installed LPAR manager license is valid:
LPAR manager 4.0 format.
Not Installed Sub version of the FRU format is
the default value.
LPAR manager license is invalid:
LPAR manager 4.0 format.
Essential LPAR manager Essential model
LPAR manager license is valid:
LPAR manager 4.1 or later
formats.
Enterprise LPAR manager Enterprise model
LPAR manager license is valid:
LPAR manager 4.1 or later
formats.
ERROR Fails to obtain status due to an
error.
531
Description of value