Hitachi Compute Blade 2000 User Manual page 552

Items of the system event log are described in the table below.
Description of
Item
item
When a log is
Timestamp created. (local
time)
Where the
Module
event occurs
Level
System
Event data
event log
Message Event message
If you enter D in the DL command menu and press Enter, you are required to select a
module for data collection: the prompt is ready. Select a module for data collection,
and a message to confirm the data collection: the prompt is ready. If you select the
physical partition, input the physical partition number. Input Y and press Enter, and the
log file data for a probe start to be created. To cancel creating the data file for a probe,
input N after the confirmation message and press Enter or just press Enter.
Select module (P=Partition,M=Management module,A=All,[Q=Quit]) : A (Enter)
WARNING : If confirm, it will take few minutes to dump log to file.
Confirm? (Y,[N]) : Y (Enter)
- Dumping log to file was completed.
- File name is "mm-20090303-184046.dmp".
Hit enter key. (Enter)
It takes a few minutes to create a log data file for a probe. When it is completed, the file
name is displayed: the prompt is ready. Press Enter, and the screen returns to the DL
command menu.
Value
YYYY-MM-DD
YYYY: AD year; MM: month; DD: day; hh:
hh:mm:ss
hour; mm: minute; ss: second
PX PartitionX
MX SVPX
SWX Switch module
IOXX I/O board module
PSX Power supply module
FANX Fan module
ETC Others including "Unknown"
Info Information
Caution
WARNING
FAIL
IIII RR gggg ee IIII: Record ID
ssSS
RR: Record type
ee11223344
gggg: Generator ID
ee: evn revision
ss: Sensor type
SS: Sensor number
ee: Event trigger
11: Event data 1
22: Event data 2
33: Event data 3
Displayed in ASCII.
501
Description of value