Hitachi Compute Blade 2000 User Manual page 546

Items of management module status are described in the table below.
Description of
Item
item
Management
M module slot
number
Management
Behavior module
performance
Power supply
Power
status
Status:
Whether or not
Condition
available for the
user operation;
FAIL status
Status of the
LID Lamp
identification LED
Enter P in the MMC command menu and press Enter. The Power control menu is
displayed.
(P,L,[Q]) : P (Enter)
-- Management module status --
M Behavior Power Condition
- -------- ----- ------------- --------
0 ------ --- -----------
1 Active On Normal
-- Power control menu --
S. Shutdown.
R. Restart.
SW. Switch active/standby.
Q. Quit.
(S,R,SW,[Q]) :
Value
0 or 1
-
------- No management module is installed.
"Active" undecided
Boot is disabled.
Active
Standby
------- No management module is installed.
On The management module is
powered on.
Off The management module is
powered off.
------- No management module is installed.
Normal Active; standby
Booting Booting now
Shutting down Shutting down now
Boot disable Boot is disabled.
FAIL The module fails.
------- No management module is installed.
Boot is disabled.
Boot of the other module is disabled.
On LED lights solid.
Off LED is off.
LID lamp
------
Off
495
Description of value