Hitachi Compute Blade 2000 User Manual page 543

Description of
Item
item
Powering-off
unnecessary
Optimization
power supply
modules
Items of power supply AC recovery setting are described in the table below.
Description of
Item
item
Power supply slot
PS
number
AC Power supply AC
recovery recovery setting
If you enter R in the PSM command menu and press Enter, you can change the
redundancy setting on the power supply module. The current value and specifiable
values are displayed and prompt is ready. Press Enter or input a setting value and
press Enter, and the changed value is displayed. A message to confirm the setting
appears and prompt is ready. Input Y and press Enter, the redundant setting for the
power supply module will be effective.
To cancel the setting change, input N after the confirmation message and press Enter
key or just press Enter.
Policy : N+N
(0=N+N,1=N+1,2=Not redundant,[Unchange]) : 1 (Enter)
-- Power supply redundancy setting --
Policy : N+1
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
If you enter O in the PSM command menu and press Enter, you can change the
optimization setting. The current setting value and specifiable values are displayed and
prompt is ready. Press Enter or input a setting value and press Enter, and the
changed value is displayed. A message to confirm the setting appears and prompt is
ready. Input Y and press Enter, the optimization setting for the power supply module
will be effective.
Value
Enable Power-off function is enabled.
Disable Power-off function is disabled.
Unknown The setting value is unknown.
ERROR Failed to obtain the value.
Unexpected setting value.
Value
0 to 3
Enable
Disable
492
Description of value
Description of value
-
The system will be
automatically booted when
power is restored to the
power supply module.
The system will not be
automatically booted when
power is restored to the
power supply module.