Self Diagnosis - SSANGYONG Rodius 2012.07 Manual

08-14
4) Washer Coupled Wiper Function
Check the washer coupled wiper operation by pressing the washer switch.
5) Irregular Operations (Abrupt Operations)
- Check the sensor for coming off.
- Check the rain sensor cover installation.
- Check that the customer is familiar to how to control the wiper sensitivity.
Check that the customer can select the sensitivity by selecting the variable resistance value
(stage 1 to stage 5), that is, the wiper sensitivity control value. And, also check whether the
sensitivity is selected to the highest value of FAST (stage 5).
- Check the wiper blade for wear.
If the wiper blade cannot wipe the glass uniformly and clearly, the irregular operations could be
occurred. And, the wiper blade should be replaced with new one with same specifications.

6) Self Diagnosis

▶Poor sensing
Position the wiper switch to "AUTO" position and rotate the variable resistance knob from "FAST"
toward "SLOW" by one step.
At this moment, check if the wiper operates one cycle.
The wiper operates when the windshield glass is excessively worn or scratched, the windshield
glass is not cleared wiped due to using worn wiper blade or different wiper blade, or the rain
sensor is not improperly installed.
▶Poor sensor
Rotate the variable resistance knob toward "SLOW" by 2 more steps. At this moment, check if
the wiper operates one cycle.
The wiper operates when the sensor is defective.