Optional Group Features - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures

Optional Group Features

Optional Group Features
This section contains programming summaries for the following optional features:
Call Pickup Groups
Group Paging
Group Coverage Member Assignments
Group Coverage Delay Interval
Group Calling Member Assignments
Group Calling Line/Trunk or Pool Assignments
See Chapter 3, ''Common Administrative
information.
Call Pickup Groups
Use this procedure to assign or remove an extension from a call pickup group. A
call pickup group consists of telephone users who can answer each other's calls
either by pressing a button or by dialing a code.
NOTES:
1.A maximum of 30 call pickup groups, with a maximum of 15 extensions
per group, is allowed.
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you must remove it
Summary: Call Pickup Groups
Programmable by. System Manager
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
from its current group.
All
Not required
Form 7a, Call Pickup Groups
Not applicable
Call pickup group number, extension number
Yes
No
Extensions
no.
Enter
no.
4
Procedures'', for detailed programming
4
4
Dial pickup group
Call Pickup
Dial ext. no.
Enter
Type pickup group no.
Issue 1
June 1997
Page 4-263
Enter Exit Exit
Type ext.