Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 453

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Block Procedure
Console/Display Instructions
Specify the block of 20 lines associated with 20 buttons on the system program-

ming console.
Select
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Specify touch-tone or rotary signaling for each block.

Return to the System Programming menu.

Select .
Exit
Principal User for Personal Line
Use this procedure to assign or remove one telephone as principal user for a
personal line. When a telephone with Remote Call Forwarding activated is
assigned as principal user, calls received on the personal line are forwarded to an
outside telephone number. In addition, calls received on that line are sent to that
telephone's individual and/or Group Coverage receivers unless the personal line
button is set to No Ring.
The principal user assignment must be removed before the trunk can be removed
from a button on the telephone.
When no principal user is assigned for a personal line, calls received on the
personal line are not forwarded to outside telephone numbers; calls received on
the personal line follow the coverage patterns for all users who share the line.
Summary: Principal User for Personal Line
Programmable by
Mode
Idle Condition
Additional Information
Toggle the green LED on or off as required.
On = long hold disconnect interval
Off = short hold disconnect interval
System Manager
All
Not required
4
4
Issue 1
June 1997
Page 4-46
PC