Did Trunk Type - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DID Trunks
Console Display/Instructions
Assign or remove the trunk.

Return to the System Programming menu.

Select three times.
Exit

DID Trunk Type

Use this procedure to specify the DID trunk type as either immediate-start or
wink-start. Wink-start is more reliable if the local telephone company supports it.
Summary: DID Trunk Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: DID Trunk Type
Console/Display Instructions
Select the Lines and Trunks menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
Additional Information
System Manager
Hybrid/PBX
DID trunk idle
Form 3d, Incoming Trunks: DID
Wink-start
Immediate-start, Wink-start
No
No
LinesTrunks
no.
Enter
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
Toggle the green LED on or
off as required.
On = assign DID trunk to block
Off = remove DID trunk from block
4
4
Dial trunk block
DID Type
or
Immed Wink Enter
Type trunk block no.
4
Issue 1
June 1997
Page 4-127
PC
Exit Exit
or
PC