Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 863

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
D General Feature Use and Telephone Programming
Telephone Programming
Table D-3. Programming MLX 10 Telephones
Step
1 Label the button.
Note: Skip this step if the feature will
not be programmed onto a button.
2 Begin programming.
3 Select the feature.
4 End programming.
Action
Remove the clear label cover from the
telephone by pulling up on the tab that
extends from the top of the cover.
Write the feature name on the card next
to the button to be programmed.
Replace the cover.
Press the Feature button and then dial
.
00
Press the button you labeled.
Note: If the feature does not get programmed
onto a button, press any line button. This does
not affect the button in any way.
Dial the programming code.
The feature is programmed.
Press the Feature button and dial
Issue 1
June 1997
Page D-14
.
*00