Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 273

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3
Common Administrative Procedures
Optional Group Features
Console/Display Instructions
Continue to assign the extension to another paging group
 
or go to Step 9.
Select
Next.
Return to the System Programming menu.
 
Select
twice.
Exit
Group Coverage Member Assignments
Use this procedure to assign or remove an extension from a coverage group. A
coverage group is a group of senders. Coverage is an arrangement by which calls
from a group of senders are redirected to one or more receivers.
NOTE:
NOTE:
NOTE:
This procedure assigns senders. Before you begin, make certain that the
receivers for the coverage group are also programmed. Receivers can be
assigned through individual or centralized telephone programming. You
can also use the Integrated Solution II/III feature, Integrated Administration,
to assign coverage receivers. See
Programming''
programming procedure.
A maximum of 30 coverage groups are allowed, each with an unlimited number of
members. Up to eight receivers can be assigned per coverage group.
An extension can be a sender in only one group; it can be a receiver for more than
one coverage group. A calling group can be assigned as a receiver for a coverage
group (see
queue can be a receiver for up to 30 coverage groups. See "QCC Operator to
Receive Calls."
If the sender's extension has one or more personal lines assigned, the sender can
be assigned as the principal user so that calls received on the personal line are
sent to receivers programmed for Individual or Group Coverage. See "Principal
User for Personal Line."
To reassign an extension to a new coverage group, just make the assignment; the
extension is automatically removed from its old group.
Additional Information
for information about the appropriate centralized
''Group Coverage
Receiver''). In Hybrid/PBX mode only, the QCC
Return to Step 6 to continue program-
ming. The next paging group will be dis-
played on Line 1.
3
Chapter , ''Centralized Telephone
Issue 1
June 1997
Page 3-119
PC

Advertisement

Table of Contents
loading

Table of Contents