Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 202

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
QCC Optional Features
Extended (Directed) Call Completion
Use this procedure to specify one of the two basic options shown below for QCC
operator positions with a DSS only:
Automatic Completion. Allows one-touch call transfer; that is, calls are
transferred by touching only an extension button on the DSS. The operator
does not have to press the Release button.
Manual Completion. QCC operators must press the Release button to
direct a call using a DSS.
This option cannot be programmed for individual QCC operator positions. The
setting applies to all QCC operator positions.
Summary: Extended (Directed) Call Completion
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Extended (Directed) Call Completion
Console Display/Instructions
Select the Operator menu.

System Programming:
Make a selection
System
SysRenumber
Operator
_
LinesTrunks
Exit
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Automatic Extended Completion
Automatic, Manual
No
No
Operator
or
Complete
>
Extensions
Options
Tables
AuxEquip
NightSrvce
3
3
Queued Call ExtndComplt
Manual Complete
or
3
Additional Information
June 1997
Page 3-48
Automatic
Enter Exit Exit
Issue 1
PC