Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 120

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
The converted file cannot have the same name as the file from whch you
converted. If you specify the same filename, the following screen appears:
The file selected to
convert to is the same
as the file selected to
convert from.
choose a different file.
Press Enter to continue
Press
Check the updated file screen and press

Please select file name
to convert to
NEW FILE to create a new
file on selected drive.
Enter Filename:
N: FILENAME.NEW
(default is RESTORE.NEW)
Observe the conversion progress screen.
CONVERSION IN PROGRESS
Converting From:
N: FILENAME.XXX
Converting To:
N: FILENAME.NEW
When the conversion completes, the screen shown in Step 13 appears.
Press any key to return to the SPM Main Menu.

Language
A language attribute in the SPM configuration file \spm\ams.cfg (DOS version) or
/usr/ams/ams.cfg (UNIX System version) specifies whether SPM menus, pop-up
windows, and other messages are presented in English, French, or Spanish. A
second language selection option affects messages from the control unit to SPM
and controls the display on the console simulation window for the duration of the
session. These two language options operate independently of each other.
Please
and repeat this step.
,
or select
.
FILENAME.NEW = name entered in
Step 10
N = drive
FILENAME.XXX = name entered at Step 4
FILENAME.NEW = name entered at
Step 10
N = drive
2
Issue 1
June 1997
Page 2-36