Sub A Pools; Pool Routing - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Automatic Route Selection

Pool Routing

Use this procedure to identify the trunk pools on which to route calls to area codes
and/or exchanges included in ARS tables.
A maximum of six routes (numbered 1 through 6) can be specified for each
subpattern. Pool routing is programmed for Tables 1 through 16. Tables 17 and
18, the Default Toll and Default Local tables respectively, cannot be changed.
Summary: Pool Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Pool Routing
Console/Display Instructions
Select the Tables menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
Form 3g, Automatic Route Selection Default and Special
Numbers Tables
Not applicable
Not applicable
No
No
Tables ARS
and pool route no.
code
Enter
no.
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
4
4
or

Sub A Pools

Dial pool dial-out
Enter
Exit Exit
or Type table no. and pool route
Type pool dial-out code
4
June 1997
Page 4-324
Dial table no.
Sub B Pool
Issue 1
PC