Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 251

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Telephone Features
Console/Display Instructions
Specify the extension.

Forced Account Code:
Enter extensions
Backspace
Exit
Assign or remove the forced account code entry from the extension entered in

Step 3.
Select
Enter
Delete
Return to the System Programming menu.

Select twice.
Exit
Microphone Operation
Use this procedure to enable or disable microphones on MLX telephones (except
QCC operator positions). When the microphone is disabled, users cannot use the
speakerphone to conduct conversations.
NOTE: NOTE: NOTE:
The microphone cannot be disabled on analog multiline telephones or on
MLX telephones used as QCC operator positions.
Summary: Microphone Operation
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Delete
Enter
or
.
System Manager
All
Not required
Form 4d, MLX Telephone
Form 5b, Direct-Line Console (DLC): Digital
Enabled
Enabled, Disabled
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = forced account code entry is
assigned to extension.
Off = forced account code entry is not
assigned to extension.
You may continue to assign or remove
forced account code entry from addi-
tional extensions by repeating Steps 3
and 4.
3
3
Issue 1
June 1997
Page 3-97
PC
Ã