Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 778

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Memory Card
Select
Yes
screen messages that may appear while formatting is in progress.
Table 4-8.
Message
Formatting Memory Card
Formatting of Memory
Card Completed
Memory Card cannot be
formatted
Formatting of Memory
Card FAILED
Missing Card or Card Not
Inserted Correctly
If Home or Menu are pressed during a format procedure, the format is terminated.
The data on the memory card may be lost. See
for detail about these keys.
Backup
Use this procedure to make a copy of your customized system data. You should
create a backup at least three times during system installation (so that
programmed information is not lost), and once after each system upgrade, service
technician visit, or major system reconfiguration.
See Chapter 3, ''Common Administrative
and a list of errors that can occur during a backup procedure.
Summary: Backup
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
(or press ) to begin the memory card format.
Memory Card Formatting Messages
System Manager
All
Not required (No extensions are allowed to be in
programming mode except system programming console)
Not applicable
Not applicable
Not applicable
Yes
No
What it Means
The format is in progress.
The format was successful and has
completed.
The memory card cannot be formatted.
Remove the card and repeat the procedure
with another card.
The format was unsuccessful. Remove the
card and repeat the procedure with another
card.
Verify that the card is inserted correctly and
repeat the procedure.
Chapter 1, ''Programming Basics''
4
Procedures'', for detailed information
4
Issue 1
June 1997
Page 4-371
Table 4-8 lists the