Upgrading The System - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM

Upgrading the System

Upgrading the System
!
WARNING:
The following procedures are to be used by qualified technicians or service
personnel only. Installation or maintenance of this product by anyone other
than qualified personnel may damage or impair the product; your limited
warranty does not cover such damage. For details, see your limited
warranty in the Customer Support Information in the back of this book.
Hazardous electrical voltages are present inside this product.
This section describes upgrading your communications system to Release 5.0.
You can use this procedure to perform the following upgrades:
From Release 1.0 to Release 5.0
From Release 1.1 to Release 5.0
From Release 2.0 to Release 5.0
From Release 2.1 to Release 5.0
From Release 3.0 to Release 5.0
From Release 3.1 to Release 5.0
From Release 4.0 to Release 5.0
From Release 4.1 to Release 5.0
From Release 4.2 to Release 5.0
NOTE: NOTE: NOTE:
You must have a version later than SPM 4.15 to upgrade from Release 3.1
to Release 4.0.
MERLIN II Communications System programming cannot be upgraded to this
communications system. The new communications system must be completely
reprogrammed.
2
Issue 1
June 1997
Page 2-53