Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 144

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Upgrading the System
Table
communications system.
— When you upgrade from Release 4.0 to Release 4.2, you must
program the features listed in
Table 2-13, then the features listed in
— When you upgrade from Release 3.1 to Release 4.2, you must
program the features listed in
Table 2-12, then the features listed in
— When you upgrade from Release 3.0 to Release 4.2, you must
program the features listed in
Table 2-11, then the features listed in
listed in Table 2-13.
— When you upgrade from Release 2.0 or 2.1 to Release 4.2, you
must program the features listed in
listed in Table 2-10, then the features listed in
features listed in
— When you upgrade from Release 1.1 to Release 4.2, you must
program the features listed in
Table 2-9, then the features listed in
listed in Table 2-11, then the features listed in
features listed in
— When you upgrade from Release 1.0 to Release 4.2, you must first
program the features listed in
features listed in
then the features listed in
Table 2-11, then the features listed in
listed in Table 2-13.
2-14. Lists the features added with Release 5.0 of the
— When you upgrade from Release 4.2 to Release 5.0, you must
program the features listed in
— When you upgrade from Release 4.1 to Release 5.0, you must
program the features listed in
Table 2-14.
— When you upgrade from Release 4.0 to Release 5.0, you must
program the features listed in
Table 2-13, then the features listed in
— When you upgrade from Release 3.1 to Release 5.0, you must
program the features listed in
Table 2-12, then the features listed in
listed in Table 2-14.
— When you upgrade from Release 3.0 to Release 5.0, you must
program the features listed in
Table 2-11, then the features listed in
listed in Table 2-13, then the features listed in
Table 2-12, then the features listed in
Table 2-11, then the features listed in
Table 2-10, then the features listed in
Table
Table 2-12, then the features listed in
Table 2-8, then the features listed in
Table
Table 2-13.
Table 2-7, then you must program the
Table 2-8, then the features listed in
Table 2-10, then the features listed in
Table 2-14.
Table 2-13, then the features listed in
Table 2-12, then the features listed in
Table 2-11, then the features listed in
Table 2-10, then the features listed in
Table 2-14.
Table 2-13.
Table 2-12, then the features
2-9, then the features
Table 2-11, then the
Table
2-10, then the features
Table 2-12, then the
Table
Table 2-12, then the features
Table 2-14.
Table 2-13, then the features
Table 2-12, then the features
Table 2-14.
Issue 1
June 1997
Page 2-60
2-13.
2-9,