Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 449

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Single Line Procedure
Console/Display Instructions
Specify entry mode.

Select
Entry Mode
Enter the number of the line/trunk that requires a toll prefix (1 or 0)

before the area code.
Toll:
Enter toll prefix lines
Backspace
Exit
Assign or remove the toll prefix requirement from the line/trunk.

Select
Enter
Delete
Return to the System Programming menu.

Select three times.
Exit
Block Procedure
Specify the block of 20 lines associated with 20 buttons on the system program-

ming console.
Select
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Specify whether or not a toll prefix is needed.

.
Delete
Enter
or
.
Additional Information
Dial or type [ nn ].
You may continue to assign or remove the toll
prefix requirement from additional lines/trunks by
repeating Steps 2 and 3.
Toggle the green LED on or off as required.
On = toll prefix needed
Off = toll prefix not needed
Issue 1
June 1997
Page 4-42
PC
Ã