Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 786

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Memory Card
Wrong Type of Card
Memory Card Restore:
Inserted Memory Card is
not the correct type.
Remove and insert MERLIN
LEGEND Backup/Restore
Card.
Exit
The inserted card does not match the card option selected from the System
menu. Remove the card and repeat the restore procedure with the correct type of
card. See
Board Mismatch
Restore n :
Restore Failure
RESTORE IS CANCELED.
Board mismatch between
control unit and file.
Exit
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
Repeat the restore procedure with another file.
Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
''Card Types'' for information about the card labels.
n = filename selected
4
4
Issue 1
June 1997
Page 4-379