Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 584

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
2.You must program a service before you program any other Dial Plan
Routing function. If you have not programmed a service, complete the
procedure below for the
for each optional function that you want to program.
Summary: Dial Plan Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To specify Service:
Service
System Manager
Hybrid/PBX
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Service: empty; Patterns: blank; Total Digits: 0;
Delete Digits: 0; Add Digits: 0
Service: Toll, Local, Miscellaneous
Entries: 0–15
Digits per Pattern: 0–8
Total Digits: 1–14
Delete Digits: 0–14, 0=wildcard
Add Digits: 0–4 (valid digits: 0–9)
No
No
LinesTrunks PRI
no. Select service
Enter
To specify Patterns:
LinesTrunks PRI
no. Drop
Enter
pattern
Enter Exit
To specify Total Digits:
LinesTrunks PRI
entry no. Drop
Enter
digits
Enter Exit
To specify Delete Digits:
LinesTrunks PRI
entry no. Drop
Enter
digits
Enter Exit
To specify Add Digits:
LinesTrunks PRI
entry no. Drop
Enter
digits
Enter Exit
option and then repeat the procedure
4
DialPlanRtg Service
Exit Exit
DialPlanRtg Patterns
Dial
Exit Exit
DialPlanRtg Total Digits
Dial
Exit Exit
DialPlanRtg Delete Digits
Dial delete
Exit Exit
DialPlanRtg Add Digits
Dial add
Exit Exit
Issue 1
June 1997
Page 4-177
Dial entry
Exit
Dial entry
Dial
Dial
Dial