Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 716

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Features
Console Display/Instructions
Enter a code of up to 11 digits [ N = any combination of 0 to 9 and an asterisk (*)].

Dial or type [ N ].
Continue to assign the code to another barrier code ID number or go to

Step 6.
Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select three times.
Exit
Remote Access with Barrier Codes
Use this procedure to change the class of restriction for individual remote access
barrier codes. The class of restriction assigned to each barrier code allows or
denies the use of the following system features:
Restriction. Determines whether remote access users can make local
and/or toll calls, and includes the following settings:
ARS Facility Restriction Level (Hybrid/PBX only). Allows or restricts use of
outgoing trunks by assigning a facility restriction level (FRL) from 0 through
6. The FRL ranges from 0 (most restrictive) to 6 (least restrictive). The FRL
value assigned here is the opposite of the FRL value assigned to the ARS
route, where a value of 0 is the least restrictive, and a value of 6 is the most
restrictive.
Allowed Lists Assignment. Assigns Allowed Lists and is used when remote
access users are restricted from making local or toll calls.
Disallowed Lists Assignment. Assigns Disallowed Lists and is used when
remote access users are not restricted from making local or toll calls.
A maximum of eight Allowed or Disallowed Lists can be assigned to each barrier
code. Class of restriction settings apply to individual barrier codes.
— Unrestricted
— Toll restricted
— Outward restricted
Additional Information
Return to Step 3. The next barrier code number
will be displayed on Line 1.
4
Issue 1
June 1997
Page 4-309
PC
Ã