Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 280

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Group Features
Console/Display Instructions
Enter the extension number of the calling group.

Group Calling:
Enter extension number
of group
Backspace
Exit
Save your entry.

Select .
Enter
Specify the extension.

Group Calling xxxx :
Enter group members
Backspace
Exit
Assign or remove the extension from the calling group.

Select
Enter
Delete
Continue to assign the extension to another calling group or go to Step 10.

Select
Next
Return to the System Programming menu.

Select three times.
Exit
Enter
Delete
Next
Enter
or
.
Additional Information
See "System Renumbering" in
for the factory setting for extension
numbers assigned to calling groups.
Dial or type [ nnnn ].
xxxx = number entered in Step 5
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is a member of the calling group.
Off = extension is not a member of the calling
group.
You may continue to assign or remove
extensions from the calling group by
repeating Steps 7 and 8.
Return to Step 7 to continue program-
ming. The next calling group will be dis-
played on Line 1.
Issue 1
June 1997
Page 3-126
PC
Chapter
Ã
Ã